|
All Thread mills below on SALE |
|
1-4 pcs (mix & match) $99.00 each |
|
5+ pcs (mix & match) $89.00 each
All 1/4 inch shank METRIC
Mini Thread mills also included at sale pricing -
CALL ! Free
Programming Help !
|
|
Max Thread Depth upto 2xD |
| Pitch TPI |
UNC |
UNF |
d |
D |
l |
L |
USST Part Number |
| 72 |
- |
1 |
1/4 |
.057 |
.150 |
2.5 |
T-CMTS72UN-800 |
| 64 |
1 |
2 |
1/4 |
.055 |
.150 |
2.5 |
T-CMTS64UN-805 |
| 56 |
2 |
3 |
1/4 |
.065 |
.170 |
2.5 |
T-CMTS56UN-810 |
| 48 |
3 |
4 |
1/4 |
.075 |
.200 |
2.5 |
T-CMTS48UN-815 |
| 40 |
4 |
- |
1/4 |
.083 |
.250 |
2.5 |
T-CMTS40UN-820 |
| 40 |
5 |
6 |
1/4 |
.096 |
.280 |
2.5 |
T-CMTS40UN-825 |
| 36 |
- |
8 |
1/4 |
.130 |
.350 |
2.5 |
T-CMTS36UN-830 |
| 32 |
6 |
- |
1/4 |
.100 |
.280 |
2.5 |
T-CMTS32UN-835 |
| 32 |
8 |
10 |
1/4 |
.126 |
.370 |
2.5 |
T-CMTS32UN-840 |
| 28 |
- |
1/4 |
1/4 |
.197 |
.570 |
2.5 |
T-CMTS28UN-845 |
| 24 |
10,12 |
- |
1/4 |
.138 |
.420 |
2.5 |
T-CMTS24UN-850 |
| 20 |
1/4 |
- |
1/4 |
.187 |
.550 |
2.5 |
T-CMTS20UN-860 |
|
Max Thread Depth upto 3xD |
| Pitch TPI |
UNC |
UNF |
d |
D |
l |
L |
USST Part Number |
| 40 |
5 |
6 |
1/4 |
.096 |
.380 |
2.5 |
T-CMTS40UN-865 |
| 32 |
8 |
10 |
1/4 |
.126 |
.490 |
2.5 |
T-CMTS32UN-870 |
| 28 |
- |
1/4 |
1/4 |
.197 |
.750 |
2.5 |
T-CMTS28UN-875 |
| 20 |
1/4 |
- |
1/4 |
.187 |
.750 |
2.5 |
T-CMTS20UN-885 |
|
|
|
Mini Mill Thread Mills
vs Taps
- Mini Thread mills
produce Better Thread surface quality than
taps
- Threads made by mini
thread mills have More accurate thread geometry
than tapped threads
- 4H, 5H, 6H can be
achieved with the same thread mill
- Thread milling using
a mini thread mill takes the same machining time
or shorter as compared with tapping time
- Tool breakage is
almost impossible using mini thread mills - taps
can break quite often while tapping hard or gummy
materials
- Mini thread mills
produce a very low load on the machine as
compared to taps.
- 1 mini thread mill
can be used on a wide range of diameters -
not so with taps
- LH and RH threads
are produced with the same mini thread mill -
you would require different taps for each hand
threads
- Mini thread mills
produce a full profile thread - taps produce a
partial profile thread
|
|
|
|
